• Wireless Baby Alarm Infant Cry Detector Baby Monitor Watcher

    US$7.47


3.2 Inch Wireless Digital Portable IR Baby Monitor DVR with Night Vision and Motion Detection

0 Review(s)

  • Item#: A20516
  • Retail price:   US$148.00
  • Wholesale Price: US$123.59

  • Minimum Order: 1 Piece(S)

  •  Sold Out 

    3.2 Inch Wireless Digital Portable IR Baby Monitor DVR with Night Vision and Motion Detection

    Highlights:

    100% digital signal for superior clarity and range
    High Quality H.264 video signal encoding/decoding with 20-25 frames per second (fps) transmission
    Supports up to 4 cameras (one camera included)
    Take snapshots (pictures) – requires TF (micro-SD) memory card for saving pictures
    User selectable Manual or Motion Detection Audio/Video Recording – requires TF (micro-SD) memory card for saving videos
    User selectable Motion Detection Alert (Monitor Beeps when Motion is Detected) 
    Over 250 frequency-hopping sequences to minimize interference
    Digital security for complete privacy – neighbors cannot get audio or video from your camera(s)
    Wireless transmission range of approximately 600 feet (200 meters) line-of-sight (open area)
    Automatic infra-red night vision technology (approximately 10 feet night-vision range) 
    Two transmission Modes: Audio & Video, and Audio Only
    Intelligent voice activity detector to lower noise and save power/battery
    Sleep mode with Voice Activation (VOX) to save power
    Set up to 5 alarm settings (e.g. use it to setup, up to 5 feeding/medicine-reminder alarms during a 24 hour period – repeat everyday)
    Multi-Language Support (English, French, German, Italian, Spanish)
    Both camera and monitor work with 3 different power sources; AC adapter, Computer’s USB port or 3.7V Li-ion battery (AC adapters & batteries and a USB cable included with the system)

    Manufacturer Specifications:

    Monitor Type / Resolution: 3.2” TFT LCD / 320 x 240
    Camera Sensor / Resolution: CMOS / 640 x 480 (VGA)
    Video Frame Rate: 25-30 fps (Typical – with no interference)
    Transmission Frequency: 2.4GHz (ISM band)
    Video Encoding/Decoding: H.264
    Audio Encoding/Decoding: SPEEX
    Transmission Power: 20dBm
    Transmission Rate: 3Mbps
    Power Consumption: 350~400mA (Camera); 300~350mA (Monitor)
    Audio Sampling Rate:16kHz (16bit)
    Frequency Responds: 20Hz - 20kHz
    Total Harmonic Distortion:<  0.05%
    Signal to Noise Ratio: ≧75dB
    Receive Sensitivity: < -90dBm
    Battery Recharging: 5 hrs with device powered off (not in use), 10 hrs with device powered on (in use)
    Battery Usage (Camera and Monitor): ~ 3 hrs – continuous use  ~ 4-6 hrs (with power save/audio only mode)
    Memory Card Slot: TF (Micro-SD) up to 16GB capacity (not included)
    Supply Voltage: 5V DC, 1000mA AC adapters, computer’s USB port or 3.7V Li-ion battery
    Ankaka Wholesale Ref.: OBYTENEN

    Package list:

    1 x 3.2 Inch Wireless Digital Portable IR Baby Monitor DVR with Night Vision and Motion Detection
    1 x USB Cable
    1 x Camera Stand/Wall Mount
    1 x Monitor Stand
    1 x Rechargeable Battery for the Monitor
    2 x A/C Adapters: INPUT: 100V-240V 50/60Hz OUTPUT: 5V 1000mA
    1 x User Manual

    3.2 Inch Wireless Digital Portable IR Baby Monitor DVR with Night Vision and Motion Detection

    Wireless 3.2 Inch IR Baby Monitor

    3.2 Inch Wireless Digital Portable IR Baby Monitor DVR with Night Vision and Motion Detection

    One Monitor to 4 Cameras

    3.2 Inch Wireless Digital Portable IR Baby Monitor DVR with Night Vision and Motion Detection

    Supporting Micro SD-Card

      Payment/Shipment/Refund/Warranty

        Please refer to the bottom of the site.